PFX (amplifier built-in, thinner type)
Thickness: 3.5mm
Requires little space
Easy installation |  |
|
PEX (compact, amplifier built-in)
Complete functions
Strong with various environments |  |
|
PVF (optical fiber sensor)
Easy to confirm status with the big indicator lamp
Driver-free sensibility adjuster |  |
| |
LDA (digital laser sensor with separate amplifier)
Many teaching modes available depend on applications including detecting transparent objects.
Light receiving sensibility stabilization
Coaxial reflection type makes it possible to install in limited space. |  |
|
LEX (amplifier built-in, spot laser sensor)
Long distance and viewable spot laser sensor
3 types available for different applications |  |
|
PLX (free power source photo sensor)
Work with DC or AC power supply
Detection distance: through beam 10m, retro-reflection 4m, diffuse-reflection 70cm |  |
| |
FBX-25 (U-shaped sensor)
One-beam and two-beam types available
Width: 25mm, repeatability: +/-0.1mm
Suitable for various positioning control applications with the sensor’s fast response and high repeatability |  |
|
FB-5C (U-shaped sensor)
Width: 5mm
Suitable for various positioning control applications with the sensor’s fast response and high repeatability |  |
|
FB-7N/7M (U-shaped sensor)
Case: steel
Width: 7mm
Suitable for various positioning control applications with the sensor’s fast response and high repeatability |  |
|
FB-10C/10M (U-shaped sensor)
Width: 10mm, repeatability: +/-0.1mm
Suitable for various positioning control applications with the sensor’s fast response and high repeatability |  |
|
FC-51C (U-shaped sensor)
Width: 50mm
Suitable for various positioning control applications with the sensor’s fast response and high repeatability |  |
|
FG-31/51 (U-shaped sensor)
Case: die casting
Width: 31mm and 51mm
Suitable for various positioning control applications with the sensor’s fast response and high repeatability |  |
|
PD3 (distance-measuring reflection photo sensor)
Stable performance
No influence by color and material quality |  |
|
PD5 (distance-measuring reflection photo sensor)
Stable performance
No influence by color and gloss
Long distance 2.5m |  |
|
●Distance Data Output Type for Robotics
URG-04LX-UG01 (Simple-URG)
Low price model. Best for beginners. USB bus power driven. Obstacle detection for autonomous service robots. Please use Classic-URG when higher accuracy is required. |  |
|
UTM-30LX (Top-URG)
30m and 270° scanning range. Working under 100,000lx with IP64 protection structure. Possible for outdoor applications such as service robots. Suitable for robots with higher moving speed because of 25msec scanning time. DC12V. |  |
|
UBG-04LX-F01 (Rapid-URG)
28msec scanning time, suitable for high speed robots to avoid obstacles or make road map. 4m and 240° scanning range, DC12V. |  |
|
URG-04LX (Classic-URG)
The fist mass production model with the most compact size. Suitable for autonomous service robots as a means of environment and self-position recognition. With compact size and light weight, power consumption is very low. 4m and 240° scanning range, DC5V. |  |
|
●Field Setting Type for AGV control
UXM-30LN-P (2D reflective sensor for obstacle detection)
It is enable to make a longer-range detection because of improving the sensitivity. Black color detection function is improved, too. |  |
|
UTM-30LN (2D reflective sensor for intrusion detection)
30m and 270° scanning range. Working under 100,000lx with IP64 protection structure. Suitable for security purpose as a monitor in outdoor environment. 25msec scanning time, also possible for sticking-out detection. |  |
|
UBG-05LN (Distance measurement type Laser obstacle detector)
Accuracy is greatly improved compare with PBS series. With DC24V, this sensor can be broadly used for control system or equipment. Field pattern: 31. |  |
|
URG-04LN (Distance measurement type Laser obstacle detector)
The most compact obstacle detection sensor with distance measurement principle using laser. Able for delicate field settings. Scanning angle is 240°, broader than PBS series. DC5V. | |
|
PBS (Distance measurement type obstacle detector)
Infra-red LED light source, distance measurement type obstacle detector. Fine settings available for each pattern, greatly improved than normal reflective photo sensors. Scanning angle: 180°, compact body with height of 60mm. |  |
| |
PD-10M/8NM (optical distance sensor)
By phase difference between the benchmark projected optical signal and the received optical signal from the reflector, the distance between 2 points will be calculated.
Featured points:
Analog output in proportion to distance
Two comparator outputs within any distance |  |
|
KAD-300 (distance measurement type close crane warning device)
Distance measurement sensor, working with its reflector
By phase difference between the benchmark projected optical signal and the received optical signal from the reflector, the distance between 2 points will be calculated.
Output can be set at any distance of its detectable range.
KAD-300 is the longer distance version of KAD-200 |  |
|
KAD-200 (distance measurement type close crane warning device)
Distance measurement sensor, working with its reflector
By phase difference between the benchmark projected optical signal and the received optical signal from the reflector, the distance between 2 points will be calculated.
Output can be set at any distance of its detectable range. |  |
| |
LXA (high accuracy laser displacement sensor)
High accuracy measurement enabled by the combination of high sensitivity linear image sensor and electronic shutter
Amplifier and monitor combined together for easier operation
Ultra high accuracy type with resolution 0.1μm plus Specular reflection Measurement
High accuracy type with the combination of measuring range and resolution |  |
|
PDA (laser type high accuracy distance sensor)
Amplifier built-in sensor
High accuracy enabled by light receiving element PSD
Detectable range: 30mm-250mm |  |
|
LWA (laser type shape sensor)
High accuracy and stable detection
Projection width: 32mm
Detectable range: 100 mm+/-25mm
Multiple function settings with LCD display |  |
| |
Sensors for Textile Industry(compact, middle distance model)
For various applications in the comprehensive processes of textile manufacture
Detecting sliver breakage or its existence |  |
|
Sensors for Iron and Steel Industry
Semiconductor laser type detectors and other various products suitable for severe environments |  |
- VMH-200
- LAV
- PHV
- PRV
- PH-DX
|
- MBX-211
- MBX-301CA
- PH-B
- Adapter
- Sensor head
|
|
MBF series (microwave level sensor)
Compatible with MBD-21/26 |  |
| |
HSA-70 (ultrasonic level sensor)
Distance is calculated by the time from projecting ultrasonic radio to receive its reflection |  |
| |
No comments:
Post a Comment